Call 08047641330 87% Response Rate

Send Email

Temperature Controller

Providing you the best range of h3tx-ua temperature controller, tx7-ua dual function single set point temperature controller, h3tx-2a-u single function two set point temperature controller and ex9-2u dual function single set point temperature controller with effective & timely delivery.
H3TX-Ua Temperature Controller
  • H3TX-Ua Temperature Controller
  • H3TX-Ua Temperature Controller
  • H3TX-Ua Temperature Controller

H3TX-Ua Temperature Controller

Product Price: Rs 1,700 / PieceGet Best Price

Product Brochure

Product Details:
BrandEAPL
Model No.H3TX-Ua
Control TypePID/On-Off
Mounting TypePanel
Voltage85V to 270V AC / DC
Frequency50/60 Hz
Rated Frequency50 /60 Hz +/- 5%
Recovery TimeMinimum 2 Sec
Rated Supply Voltage85V AC to 270V AC/DC
Operation Temperature+5 to +45 Deg C
Storage Temperature-10 to +85 Deg C
Dimension48 x 48 x 115 mm
Features:
  • 4 digit, 7 segment LED temperature display
  • LED indication for sensor, relay and function*
  • Sensor, function*, Offset**, Hysteresis parameters can be locked (by opening the short link of designated terminals) against unauthorized tampering
  • Single function (On-Off)
  • Dual function (On-Off or Self-Tune)
  • Single set point with relay output
  • Single window display for both set and process values Temperature offset calibration user settable

Other Technical Details:

  • Function : ON-OFF temperature Controller / SELF TUNE temperature controller
  • Power consumption : AC Approx. 6VA / 1.2W
  • Control output : 1 C/O contact rated for 5A @ 250V AC / 28V DC resistive load for each set point
  • Display accuracy : ± ( 0.5% of full scale) ± 1°C
  • Range : 0°C – 600°C (J TYPE) 0°C – 1200°C (K TYPE) 100°C – 300°C (PT100 ON/OFF ) 0°C – 300°C (PT100 SELF TUNE)
  • Hysterisis : 2°C – 20°C (for ON/OFF function only)
  • Input : J/K/PT100
  • Variation due to temperature : 0.25°C per degree change in ambient temperature (ref.25°C)
  • Humidity : MAX 85% RH @ 40°C
  • Insulation resistance : >100M ohms @ 500V DC
  • Service life (under no load) : 106 operations minimum
  • Electrical life (under full load) : 105 operations minimum
  • Dielectric strength : 2.5KV AC, 50Hz for 1 minute. ( Between current carrying & non-current carrying parts) 1.5KV AC, 50Hz for 1 minute. (between contacts & control circuit) 750V AC, 50Hz for 1 minute. (Between non-continuous relay contacts )
  • Electrical connection : Screw type terminals with self lifting clamps.

 

Applications: Furnace, Heat treatment equipment, Ovens, Boilers, Plastic and Rubber machinery and many more



Additional Information:

  • Item Code: H3TX-Ua
Get Best QuoteRequest A Callback
TX7-Ua Dual Function Single Set Point Temperature Controller

TX7-Ua Dual Function Single Set Point Temperature Controller

Product Price: Rs 1,770 / PieceGet Best Price

Product Details:
BrandEAPL
Voltage85V to 270 V AC /DC
Rated Frequency50 /60 Hz +/- 5%
Recovery TimeMinimum 2 Sec
Power Consumption (Va) 6VA / 1.2W
Dimension72x72x128 mm
Features:
  • 4 digit, 7 segment LED temperature display
  • LED indication for sensor, relay and function*
  • Sensor, function*, Offset**, Hysteresis parameters can be locked (by opening the short link of designated terminals) against unauthorized tampering
  • Single function (On-Off)
  • Dual function (On-Off or Self-Tune)
  • Single set point with relay output
  • Single window display for both set and process values Temperature offset calibration user settable

Other Technical Details:

  • Function : ON-OFF temperature Controller / SELF TUNE temperature controller
  • Control output : 1 C/O contact rated for 5A @ 250V AC / 28V DC resistive load
  • Display accuracy : ± (0.5% of full scale) ±1°C
  • Range : 0°C – 600°C (J TYPE) 0°C – 1200°C(K TYPE) -100°C – 300°C(PT100 ON/OFF) 0°C – 300°C (PT100 SELF TUNE)
  • Hysterisis : 2°C – 20°C (for ON/OFF function only)
  • Input : J / K / PT100
  • Ambient Temperature : Operation: -10°C to +55°C (14°F to 131°F), Storage : -25°C to 80°C ( -13°F to 176°F )
  • Variation due to temperature : 0.25°C per degree change in ambient temperature (ref.25°C)
  • Humidity : MAX 85% RH @ 40°C
  • Insulation Resistance : >100M ohms @ 500V DC
  • Sevice Life ( under no load) : 106 Operations Minimum
  • Electrical life ( under full load : 105 operations minimum
  • Dielectric strength : 2.5KV AC, 50Hz for 1 minute. (Between current carrying & non-current carrying parts) 1.5KV AC, 50Hz for 1 minute. (Between Contacts & Control Circuit) 750V AC, 50Hz for 1 minute. (Between non-continous & ralay Contacts)
  • Electrical connection : Screw type terminals with self lifting clamps

 

Applications: Furnace, Heat treatment equipment, Ovens, Boilers, Plastic and Rubber machinery and many more



Additional Information:

  • Item Code: TX7-Ua
Get Best QuoteRequest A Callback
H3TX-2A-U Single Function Two Set Point Temperature Controller

H3TX-2A-U Single Function Two Set Point Temperature Controller

Product Price: Rs 2,420 / PieceGet Best Price

Product Details:
Dimension48 x 48 x 115 mm
BrandEAPL
Rated Supply Voltage85V AC to 270V AC/DC
Rated Frequency50 / 60Hz +/- 5%
Recovery TimeMinimum 2 Sec
Operation Temperature+5 to +45 Deg C
Storage Temperature-10 to +85 Deg C
Features:
  • 4 digit, 7 segment LED temperature display
  • LED indication for sensor, relay and function*
  • Sensor, function*, Offset**, Hysteresis parameters can be locked (by opening the short link of designated terminals) against unauthorized tampering
  • Single function (On-Off)
  • Dual set point with 2 relay output one for each set point
  • Dual window separate display for set and process values
  • Both relays change over to NO at room temperature and each reverts back to NC at respective set points. It once again changes over to NO when temperature falls by the respective Set point minus hysteresis.

Other Technical Details:

  • Function : 2 Set Point temp. Controller (Alaram type)
  • Power consumption : AC Approx. 6VA / 1.2W
  • Control output : 1 C/O contact rated for 5A @ 250V AC / 28V DC resistive load for each set point
  • Display accuracy : ± ( 0.5% of full scale) ± 1°C
  • Hysteresis : 2°C – 20°C
  • Range : 0°C – 600°C (J TYPE) 0°C – 1200°C (K TYPE) 0°C – 300°C (PT100 )
  • Input : J /K/PT100
  • Variation due to temperature : 0.25 C per degree change in ambient temperature (ref.25°C)
  • Humidity : MAX 85% RH @ 40°C
  • Insulation resistance : >100M ohms @ 500V DC
  • Dielectric strength : 2.5KV AC, 50Hz for 1 minute. ( Between current carrying & non-current carrying parts) 1.5KV AC, 50Hz for 1 minute. (between contacts & control circuit) 750V AC, 50Hz for 1 minute. (Between non-continuous contacts of the relay )
  • Electrical connection : Screw type terminals with self lifting clamps.
  • Enclosure (series) : H series

 

Applications: Furnace, Heat treatment equipment, Ovens, Boilers, Plastic and Rubber machinery and many more



Additional Information:

  • Item Code: H3TX-2A-U
Get Best QuoteRequest A Callback
EX9-2U Dual Function Single Set Point Temperature Controller

EX9-2U Dual Function Single Set Point Temperature Controller

Product Price: Rs 2,530 / PieceGet Best Price

Product Details:
BrandEAPL
Temperature Range-100 to +300 Degree C
Voltage85V to 270 V AC /DC
Rated Frequency50 /60 Hz +/- 5%
Recovery TimeMinimum 2 Sec
Power Consumption (Va) 6VA / 1.2W
Dimension96 x 96 x 117 mm
Features:
  • 4 digit, 7 segment LED temperature display
  • LED indication for sensor, relay and function*
  • Sensor, function*, Offset**, Hysteresis parameters can be locked (by opening the short link of designated terminals) against unauthorized tampering
  • Dual function (On-Off or Self-Tune)
  • Single set point with relay output
  • Dual window display for set and process values

Other Technical Details:

  • Function : ON-OFF temperature Controller, SELF TUNE temperature controller
  • Control output : 1 C/O contact rated for 5A @ 250V AC / 28V DC resistive load
  • Display accuracy : ± (0.5% of full scale) ±1°C
  • Range : 0°C –600°C (J TYPE) 0°C –1200°C (K TYPE) -100°C – 300°C (PT100 ON/OFF) 0°C –300°C (PT100 SELF TUNE)
  • Hysterisis : 2°C – 20°C (for ON/OFF function only)
  • Input : J / K / PT100
  • Variation due to temperature : 0.35°C per degree change in ambient temperature (ref.25°C)
  • Humidity : Up to 95% RH @ 40°C
  • Insulation resistance : >100M ohms @ 500V DC
  • Service life (under no load) : 10 operations minimum
  • Electrical life (under full load) : 10 operations minimum
  • Dielectric strength : 2.5KV AC, 50Hz for 1 minute. (Between current carrying & non-current carrying parts) 1.5KV AC, 50Hz for 1 minute. (Between contacts & control circuit) 750V AC, 50Hz for 1 minute. (Between non- continuous relay contacts)
  • Electrical connection : Screw type terminals with self lifting clamps.
  • Enclosure (Series) : E- Series

 

Applications: Furnace, Heat treatment equipment, Ovens, Boilers, Plastic and Rubber machinery and many more



Additional Information:

  • Item Code: EX9-2U
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "Temperature Controller"?
Thank youYour Enquiry has been sent successfully.

Reviews & Rating

4.2/5

★★★★★★★★★★

Reviewed by 15 Users

  • 5★53%
  • 4★20%
  • 3★0%
  • 2★0%
  • 1★27%
  • User Satisfaction
  • Response85%
  • Quality     100%
  • Delivery   100%

Most Relevant Reviews

J
★★★★★★★★★★
18-January-22
Joseph A
Thane, Maharashtra
Response
Quality
Delivery
J
★★★★★★★★★★
18-November-21
Jyothishkumar
Hindupur, Andhra Pradesh
Product Name : Digital Timer Switches
Response
Quality
Delivery
A
★★★★★★★★★★
03-March-21
Anil Singh
Gopalganj, Bihar
Response
Quality
Delivery

© Electronic Automation Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.